uploading your website using FTP

One way to upload content to the Web is through File Transfer Protocol (FTP), which allows you to copy files from your local system onto TelePacific's server. On this page, you'll find information and helpful hints about choosing an FTP program and transferring your files to TelePacific.

Choose Your FTP Program Lots of companies offer FTP programs, but most have the same basic layout and functionality. You can download many FTP programs from the Internet as freeware, shareware, or trial software. TelePacific can't, however, recommend one FTP client over another; the choice is up to you.

Click on any of these links to check out these popular FTP programs:

Windows Mac

Begin Transfer




Following the specific instructions for your FTP client, use the steps below to transfer files:

  1. Enter your domain name into the HOST/IP/URL field. If your domain has not been transferred, use IP: 208.57.27.71.
  2. Make sure port number is set to 21. This is usually the default, so you shouldn't have to change it.
  3. Enter the Login Name and Password in the appropriate fields. You were provided with this information when your account was set up either over the phone or by fax. It's the same information you use to log into the Members Only account administration page.
  4. Connect with the TelePacific server.
  5. On the local drive side of the FTP screen, navigate to the folder where your Web page files are located. If necessary, do the same on the TelePacific side of the FTP screen.
  6. Specify file(s) you want to transfer.
  7. Initiate transfer.
  8. Once your site is uploaded to TelePacific, transfer your domain to TelePacific's Name Servers.

Helpful Hints

  • In any particular FTP program, some of these steps may be combined. Most FTP clients allow you to create new folders on your local drive and/or the public drive.
  • If you are uploading scripts to your CGI-BIN folder, remember to set the execute bit after the file is uploaded. You will use the CHMOD command or function to do this. See your FTP client help files for information on using CHMOD to set the execute bit.